D130 PRECUT BRICK OVEN KIT

TAILOR-MADE FOR COMMERCIAL APPLICATIONS

$4790

Including GST

4 Hours

Up to 400°C from ambient using around 70kg of wood.

80 Hours

From 400°C down to 70°C with door fitted

1300 mm

Fits nine 12″ pizzas or eight large roasting trays

1780 mm x 1880 mm

Minimum stand size required to fit this oven

1700 kg

Finished weight

The D130 PreCut Brick Oven Kit is tailor-made for commercial applications, or for those who really want a BIG oven in their backyard. With an internal diameter of 1300mm, the D130 PreCut Kit is a great choice if you’re opening a wood fired pizzeria, or just want to be able to cook an entire lamb with a couple of trays of vegetables at the same time.

This oven is different from the two smaller PreCut igloo kits, because the shape of the dome is not hemispheric. Due to the large width of the dome, we use an elliptical shape with steep sides and a relatively flat ceiling. This keeps the ceiling at the optimal height, perfect for cooking commercial quantities of pizza, but still ideal for roasting meat and baking bread.

Enquire Now

As with all of our PreCut Kits, we do as much as we possibly can for you. All of the bricks come cut and ground to size, we provide you with templates, CNC machined formwork, a special Trammel Tool, fibreglass dome form and much, much more. All you need to do is assemble the kit like a big Lego set (see the PreCut Kits page for more details).

There are a couple of other key differences in this oven design; 

  • As these ovens are commonly used in commercial applications, we cut the majority of the floor tiles to fit inside the walls, meaning they can be pulled out and replaced in the future if need be.
  • Instead of a fixed-radius Trammel Tool (which can only be used to create a hemisphere) the kit comes with a custom made Elliptical Trammel Tool, which can be fully adjusted to lay a smooth elliptical curve. A CNC cut elliptical dome profile template is also provided.
  • To ensure the D130 Oven is incredibly well insulated, it has two layers of Calcium Silicate Board to insulate beneath the floor and three layers of Ceramic Fibre Blanket to cover the Oven Dome with. One of the biggest costs in a Wood Fired restaurant is fuel, so we have increased the amount of insulation used in the D130 to minimise heat transfer out of the oven.
  • The D130 Kit has two layers of 50mm fire brick floor tiles. This is to give the D130 an excessive amount of thermal mass in the oven floor so that it will remain hot, especially during busy periods.

More Information

To help you build a stand suitable to support our Brick Oven Kit, we’ve put together a detailed guide to walk you through the process. Our suggestion is to build stand walls using bricks, interlocking concrete blocks, or cinder blocks which are filled with concrete and reinforcing steel.

A suspended slab of reinforced concrete is then formed up and poured to create the benchtop to support the oven. The stand must be built on reinforced concrete foundations – if you’re building on soft ground you may need to consult a builder to ensure your foundations are adequate.

If your installation involves anything more complex than the basic setup that we provide in the kit, you must engage a suitably qualified plumber to supply and install the flue for you. Your local fireplace store will have several professionals they can recommend. Your oven can reach extreme temperatures, to the point where the flue glows orange.

This is extremely important. If you install your own flue system and your oven somehow causes a catastrophic fire, your home insurance cover may be null and void. Put this in the same category as working with high voltage electricity – the risks outweigh the rewards. Don’t risk it, use a licensed plumber.

If you want one of our Wood Fired Ovens professionally installed we have a network of Oven Builders that we can put you in touch with. We call these artisans ‘Flamesmiths’ – experts in building our Wood Fired Oven Kits.

Please see the approximate pricing for some of the services that our Flamesmiths offer;

P85 PreCast Oven Construction: $1500*
D105 PreCut Brick Oven Construction: $2500*
D130 PreCut Brick Oven Construction: $3500*

*Please note these prices are only an indication, and will vary depending on access and travel time. Prices are for the construction of the oven kit only, not including the stand or any finishes. These can be quoted by the Flamesmith.

Find a flamesmith near you
1. Unboxing and Overview

2. Under Floor Insulation

3. Laying the Floor Tiles

4. Building the Brick Dome Pt1

5. Building the Brick Dome Pt2

6. Building the Brick Dome Pt3

7. Building the Brick Dome Pt4

8. Fitting the Flue Gallery

9. Insulating the Dome

10. Fitting a Granite Landing

11. Rendering the Dome

12. Finishing the Stand

1. Installing the Flue

2. Curing Fires

3. Understanding Cracking

4. Painting the Flue Gallery

5. Sealing the Oven Dome

We’ve created a set of detailed instructions to guide you through the process of building your D130 PreCut Brick Oven Kit. We want you to have a great time building it, so we’ve put a lot of effort into them to make the project as enjoyable as possible.

There are two sets of instructions; a detailed written guide and a video series to accompany it. You will need both – the written instructions give you details that can’t be covered in the videos, and the videos teach you things that can’t be covered in writing.

View FAQ

Still have some queries regarding the ovens? We have an extensive FAQ section which will be able to answer most of your burning questions.

Buy Now

If you wish to order or still have questions that the FAQ couldn't answer, we're always happy to help. Call us on (03) 9703 1758.

Happy Customers