G4 Argentinian Grill
Australian-made Argentinian charcoal grill. Four cooking levels, an insulated firebox, a lift with no brake and no cables. 304 or 316 stainless. Seven year warranty.
Price range: $6,990.00 through $9,490.00
7 year warranty
Made in Hallam, VIC
Freight Australia-wide
Melbourne showroom
Why it's different
A bronze worm gear holds the rack anywhere. Stainless roller chain, not wire rope.
500°C inside, under 70°C outside. Safer, uses less charcoal, and it can be built into timber.
Sear on the firebox, cook on the variable rack, slow-cook above, rest or hang on top.
No mild steel anywhere, down to the bolts. Nothing to rust, fray or wear out.
Designed by an aerospace engineer, folded and welded in our Hallam factory, built to order.
Three years of testing before the first one sold. The warranty most car makers give.
01 · The grill body
3 mm legs, 2 mm panels, folded in-house
Brushed 304 stainless, folded on our own CNC press brake. Thicker than it needs to be, so it feels solid the moment you touch it. A full 316 marine grade version is available, right down to the internal gears and chain.
We refer to the legs and firebox of the G4 as 'the body', this is where the raging heat of your charcoal and timber fire will be controlled and contained.
The legs of the grill are 3mm thick, while the side panels and base are 2mm thick - excessive to be honest with you but solid. When you touch the grill you can feel the thickness of the material, there is a heavy, solid feel to all of it. The material used for the body is brushed 304 Grade Stainless Steel. The body is not just Australian Made, it's folded by us on our Trumpf Trubend CNC Press Brake in-house by our skilled, dedicated team.
We also offer a full 316 Marine Grade Stainless Steel version of the grill, with every stainless component (including all of the internal gears, roller chain, sprockets etc) being made of 316 Stainless Steel.
02 · The insulated firebox
500°C inside, under 70°C outside
50 mm of calcium silicate board and 25 mm of refractory fire brick line the firebox. Safer around kids, far less charcoal to hold temperature, and the reason the G4 can be built into timber cabinetry.
While much of the competition have simply lined their stainless steel grill body with some fire bricks, we have taken ours a large step further, by insulating the grill body. We line the 2mm Stainless Steel walls with 50mm of Calcium Silicate Board, followed by 25mm of high grade refractory Fire Brick, rated to over 1350°C.
Even when you're running a firebox temperature of 500°C the outside of the grill will not exceed 70°C. While this is still moderately hot, this has some huge benefits;
- Safety. If someone touches this surface their chances of being burned are much, much lower than they would be if they touched the side of a grill made without insulation. You still need to take care to ensure children are monitored around the grill at all times, but this grill is far safer than any of its uninsulated counterparts.
- Build it in. Our grills can be built into timber cabinetry, providing that a layer of either 18mm compressed cement sheet or 20mm of natural stone such as granite is used to line the void in the cabinetry, with a 20mm ventilated air gap between this layer and the grill itself. No longer do you need to build the benches around your grill out of expensive stainless steel or concrete, you can use standard timber cabinets.
- Efficiency. Because we aren't losing lots of heat through the walls and floor of the firebox, we're able to maintain much higher temperatures in the firebox with very little fuel. This means you go through far less charcoal than you will with an uninsulated grill, saving you money and making the grilling process as sustainable as possible.
03 · Four grilling levels
Sear, cook, slow-cook, rest. All at once.
The firebox lip for searing, the variable rack you raise and lower, the optional rack above it, and the resting rack on top for resting meat or hanging a shoulder of lamb. Every grill surface fits every level.
Something that stands out immediately when you first see our grills is that there is much more than just one level upon which to cook. There are actually four, all of which can be used simultaneously. The highest temperatures will be closest to the firebox, with the temperature dropping as we move upwards.
We have designed the racks so that everything is interchangeable. Every Grill Surface can be used at every level, simply lift them off and place them on the level you want them on. This also gives us freedom to design new Grill Surfaces and accessories in the future.
- The Firebox
The internal edge of the firebox is folded inwards to create a lip on each side that your Grill Surfaces can be rested on. This is a favourite place for using the solid Round-Bar Grill Surface, as it's the highest temperature you'll get anywhere on the grill which makes it ideal for searing. - The Variable Rack
This is the rack that you can raise and lower with an easy turn of the Handwheel. Perfect for using any of our grilling surfaces, with complete control over the heat. - The Optional Rack
This sits immediately above the Variable Rack, and is called the 'Optional Rack' because it can be easily lifted off the grill and set aside when you want to raise the Variable Rack to its full height. It is an optional extra. - The Resting Rack
The very top rack, which experiences the lowest temperatures on the grill. The perfect location for resting meat that you've just grilled, or hanging things to slow cook over hours in that beautiful low heat.
04 · The handwheel and worm gear
Turn it, let go. It stays.
A 1.6 kg cast stainless handwheel drives a bronze and stainless worm gear. Worm gears are self-braking, so the rack holds at any height with no brake lever at all. Everyone who turns it in the showroom says the same thing: how smooth it is.
We have developed a unique, elegant and robust system to give our customers complete control over the grill. Ben (our founder) calls it the 'Variable Rack System', or VRS for short.
Cast Stainless Steel Monospoke Handwheel. Something that almost all of our visitors are surprised by is how solid every part of the grill is, and the Handwheel is no exception. Weighing 1.6kg of solid stainless steel, the Handwheel design is the brainchild of our CAD modelling wizard, Matt Isailofski. This not only looks incredible, but feels it too. Almost every customer who visits and turns the Handwheel is taken aback by how smooth the action is.
Bronze and Stainless Steel Worm Gear Drive. This is the heart of the VRS. We had two key design requirements from the beginning; we wanted the Handwheel to face the front rather than the side of the grill and we didn't want to have to use a brake or other mechanism to hold the grill at the required height. Enter Worm Gears - the perfect solution to both of these requirements. The Worm Gear set translates the rotation of the Handwheel drive shaft 90°, to turn the main drive shaft that runs horizontally between the columns. Worm Gears are self braking, so our system needs no brake at all. Just turn the handwheel until you've reached the height you want, and let go.
Heavy duty stainless steel columns. The structural core of the VRS, made from folded 3mm 304 grade stainless steel, TIG welded onto 5mm thick stainless steel mounting plates which are CNC cut and chamfered to blend neatly into the body of the grill.
05 · Chain, not cable
Wire rope fatigues. Roller chain doesn't.
Most Argentinian grills lift on a stainless cable wound round a shaft. Run one in a restaurant and heat plus repetition snaps it eventually. We use stainless roller chain over sprockets, like a mountain bike, because it lasts.
Most of our competitors use a stainless steel wire rope wrapped around the main drive shaft to raise and lower their grill rack. This was initially our direction too, however after running one in a high end restaurant we found that the combination of regular use and heat means that these cables are guaranteed to break, eventually. It's like taking a metal spoon and bending it back and forth repeatedly, it doesn't take long to snap the spoon in two. This phenomenon is called 'Metal Fatigue' and is the reason we chose not to use cables in our grills.
Instead, we use Stainless Steel 'Roller Chain', similar to what you would see on a mountain bike. This chain wraps over a sprocket at the top of the column on each side, which are turned by the main drive shaft. When the sprockets turn, they pull the chain over the sprocket, raising or lowering the Variable Rack depending on the direction of movement.
06 · Guide blocks, springs and bearings
Why the heavy rack feels weightless
Cast aluminium guide blocks with graphite-bronze bushings ride on four 20 mm stainless rods, so the rack doesn't wobble. Inconel springs, the alloy of jet turbine blades, carry most of the weight. Ceramic bearings keep the worm gear turning smoothly for years.
Cast Aluminium Guide Block. We needed something that we could attach to the Variable Rack that we could then link onto the roller chain drive in each column. We also had another key design criteria, that the Variable Rack be stable, not given to excessive movement or wobbling. The pursuit of this took over 18 months with multiple prototypes before we settled on our Guide Blocks. These are effectively high temperature linear bearing units, riding on four 20mm solid stainless steel rods, two on each side. Rather than having the aluminium block rub directly against the stainless steel guide rods we elected to use bronze bushings, impregnated with graphite for lubrication. These are shrink-fitted into the Cast Aluminium Guide Block using liquid nitrogen.
Inconel Spring Assisted. Other companies tend to minimise the weight of the grill surfaces they're raising and lowering, to make their system easy to use. We wanted our grill surfaces to be thick and very heavy duty, which meant they would be heavy. So we have spring-loaded both sides of the VRS, so that turning the handwheel is almost effortless. These springs are made from Inconel, which is essentially "Super Stainless Steel", most often used for turbine blades in jet engines or in the engine manifold of rockets, due to its ability to retain its tensile strength at high temperatures.
Ceramic Bearings. To ensure smooth running of the bronze worm gear set we have had special ceramic bearings manufactured to our specifications. The bearings and housing are made from Zirconia while the shields are Carbon Fibre. These are lubricated with Inox MX6 High Temperature Grease, a food grade lubricant designed for use in high temperature cooking equipment. Each grill comes with a spare tube of grease.
Custom CNC Machined Precision Parts. Rather than using off-the-shelf components we have custom designed almost every component for the VRS. The shafts, gears, bearing housings, bushings, Aluminium Guide Block and sprockets are all CNC machined to exacting tolerances, in some cases to within 0.05mm. With careful QA checks at each step of production, you can be very confident in the quality and performance of any grill you purchase from us.
07 · The round bar grill surface
10 mm machined stainless rods. Four included.
We wanted cast stainless and couldn't get it in long narrow sections, so we machine it instead: 6 mm end plates with 10 mm CNC-machined rods bolted between them. As tough as cast, and it survives being dropped.
This is one of the most heavy duty bar grills you're ever likely to encounter. We initially looked at having cast bar grills made for us, but we didn't want them to be cast iron, we wanted cast stainless, and casting stainless in long, narrow sections is notoriously difficult to do. Instead we have opted for CNC machined components to make a Grill Surface that is simultaneously solid, robust and also beautiful. The grill comprises two 6mm thick stainless steel endplates with 10mm CNC machined stainless steel rods bolted securely between them. These are as tough as any cast grill and can handle being dropped from a considerable height. You will receive four of these with your G4 Grill order.
08 · The V-bar grill and drip tray
Drains the fat, keeps the flavour. Four included.
3 mm stainless angle welded into a V-bar surface, with a cast stainless drip tray that locks on so it can't be bumped off full of hot oil. Catch the drippings, or fill it with butter and baste.
This is what everyone looks for in an Argentinian Grill, the ability to cook steak and other meat over a surface that helps to drain off the oils into a drip tray. We have taken the idea as far as we can, using 3mm thick stainless steel angle for the bars, MIG welded into the final assembly. The Drip Tray is made from solid, cast stainless steel with plenty of capacity to hold all the oil from a solid commercial cooking session, or can be used to hold molten butter or similar to baste your food with. Protrusions on the back face of the Drip Tray lock into carefully designed holes in the front face of the V-Bar Grill, so the tray cannot be accidentally bumped off, which would be very dangerous considering it's holding hot oil. You will receive four of these with your G4 Grill order.
Coming soon - The Plancha. A thick, flat plate that clips onto the top of your V-Bar Grill Surface, converting it into a Plancha.
09 · Built In or Freestanding
Into the benchtop, or on castors
Freestanding comes on heavy-duty castors with a lower shelf. Built In drops into your outdoor kitchen: line the void with 18 mm compressed cement sheet or 20 mm stone, leave a 20 mm ventilated gap, and the rest of the cabinet can be timber. Send us your drawings and we'll check the cut-out.
10 · 304 or 316 stainless
304 for most backyards. 316 by the sea or a pool.
304 is what commercial kitchens are made of: food-grade and highly corrosion resistant. 316 marine grade adds molybdenum for salt air and chlorine. On a 316 grill every stainless part is upgraded, down to the bolts, chain and sprockets.
Dimensions and specs
| G2 | G3 | G4 | |
|---|---|---|---|
| A · Overall width | 80 cm | 110 cm | 140 cm |
| B · Overall depth | 60 cm | 60 cm | 60 cm |
| C · Height, freestanding | 165 cm | 165 cm | 165 cm |
| D · Firebox height, freestanding | 90 cm | 90 cm | 90 cm |
| E · Built-in firebox (W × D × drop) | 78 × 60 × 35 cm | 108 × 60 × 35 cm | 138 × 60 × 35 cm |
| Height above bench, built in | 76 cm | 76 cm | 76 cm |
| Surfaces per level | 2 | 3 | 4 |
| Cooking surface | 1.1 m² | 1.6 m² | 2.2 m² |
| Weight, freestanding | 200 kg | 240 kg | ask us |
| Cooks for | 6–10 | 10–16 | 16–24 |
| Rack travel | 330 mm | 330 mm | 330 mm |
| Fuel | Charcoal or timber | ||
| Price from | $4,990 | $5,990 | $6,990 |
Letters refer to the drawings. Dimensions rounded to the nearest centimetre; the spec sheet has them in millimetres. Prices are for Built In, 304 stainless.
See it in action
Ben, our founder, takes you through every part of the grill. Twenty minutes if you want the detail; the first three if you don't.
What's in the box
Every grill comes ready to enjoy: bolt the Variable Rack System onto the firebox, peel the protective film off the stainless, and fire it up.
G4 firebox
Freestanding or Built In
Variable Rack System
with Resting Rack
Four V-bar grills
with drip trays
Four round bar grills
10 mm machined rods
Care kit
with spare bearing grease
Make it yours
Rotisserie kit, optional rack, windshield, ash lid, cover, extra grill surfaces and hooks, all sized to the G4.
Questions people ask
Yes. Line the void with 18 mm compressed cement sheet or 20 mm natural stone, leave a 20 mm ventilated air gap between that layer and the grill, and the rest of the cabinet can be standard timber. The insulated firebox keeps the outside of the grill under 70°C. Send us your drawings and we'll check the cut-out before you build.
With 500°C coals in the firebox the outer skin stays under 70°C, thanks to 50 mm of calcium silicate and 25 mm of fire brick in the walls and floor. Still hot to touch, but far safer than an uninsulated grill, and it uses much less charcoal.
304 for most backyards: it's what commercial kitchens are made from. 316 marine grade if you're near the coast or next to a pool; it has molybdenum for salt air and chlorine. On a 316 grill every stainless part is upgraded, including the bolts, chain and sprockets.
Included: the insulated firebox (Built In or Freestanding), the Variable Rack System, four V-bar grills with drip trays, four round bar grills, and a care kit with a spare tube of food-grade bearing grease. Optional: the Optional Rack, a canvas cover, the stainless ash lid, the windshield, extra grill surfaces, grill tools and the Rotisserie Kit.
Warehouse Pick-up
Our Oven Kits and Grills are available for collection directly from our factory complex in Hallam, Victoria - come visit us to see where it was made!
Collection Point Pickup
We have an extensive network of collection points around Australia that we can deliver our Oven Kits and Grills to. At Checkout you will be prompted to choose a collection point for your delivery (accessories will be delivered to your door).
Curbside Delivery
We have setup a network of freight companies that are able to deliver your Oven Kit or Grill directly to the foot of your driveway, unfortunately this isn't available for all addresses. Curbside availability and price will be calculated at checkout.
Every grill is made to order in Hallam. Allow four weeks from order to dispatch, plus freight. If you're on a deadline, call us on (03) 9703 1758 and we'll tell you where the build queue is.
Seven years on the grill against defects in materials and workmanship, from the date of purchase. Cooking surfaces and accessories (rotisserie kit, windshield, lid, tools) are covered for one year. It doesn't cover normal wear, over-firing, damage from winding the handwheel past its limits, or a grill that's been installed or used outside our instructions, including rainwater soaking into the firebox lining. Keep the bearings greased with the kit supplied, and if anything goes wrong, call or write to us with the install date and a description. The full terms are in the spec sheet.
See it before you buy
Our Hallam showroom is open Monday to Friday 9am–5pm and Saturdays 9am–1pm, with the grills fired up on Saturdays. Or call us on (03) 9703 1758.















































